The open-plan office has moved away from uniform grids of panel lights toward flexible, layered lighting that adapts as teams and layouts change. DC48V magnetic track systems make this possible — a single recessed or surface channel carries interchangeable magnetic modules that reposition in seconds, with no rewiring. YNDLUX manufactures DC48V magnetic track systems (20mm, 16mm, 12mm profiles) direct from our factory in China to lighting designers and M&E contractors worldwide. This guide covers designing magnetic track lighting for open-plan offices.
Why Magnetic Track Suits Open-Plan Offices
- Reconfigurable: modules snap on and reposition magnetically — adapt lighting when desks, partitions or teams move.
- Trackless "no main light" look: a continuous recessed channel gives a clean architectural ceiling instead of scattered fixtures.
- Layered light: mix spots, linear pendants and grille modules on one track for task, ambient and accent light.
- Low-voltage safety: DC48V is touch-safe, simplifying installation and modification.
Designing the Layout
Continuous runs and geometry
Magnetic track supports L, T, cross and arc connectors for continuous runs that follow the architecture — around cores, along circulation, or in grid patterns over open desks. Plan runs to align with desk clusters and walkways.
Module selection
- Linear/pendant modules — general ambient light over open desks; UGR<19 optics for screen work.
- Grille (multi-head) modules — low-glare directional light for meeting and focus zones.
- Spot modules — accent for breakout areas, art and reception.
Meeting EN 12464-1
Open offices need 500 lux at the desk, UGR≤19, CRI≥80. Combine linear modules for uniform ambient light with spots for accent, and verify with a DIALux simulation.
Control and DALI-2
YNDLUX magnetic modules are available with DALI-2 drivers for addressable zone control — dim by area, program scenes, and integrate with the BMS. This pairs naturally with daylight harvesting near facades.
YNDLUX Magnetic Track System
- DC48V, 20mm / 16mm / 12mm profiles for recessed, surface or suspended mounting
- Interchangeable modules: spot, linear, pendant, grille, folding
- UGR<19 optics, CRI≥90 options, aluminium housing 2.0mm
- L/T/cross/arc connectors for continuous runs
- DALI-2 addressable option
Get an Office Lighting Specification
Planning an open-plan office fit-out? Our technical team can provide:
- EN 12464-1 compliant layout (DIALux simulation)
- Product specification with IES/LDT files
- DALI-2 addressing scheme
- Energy calculation and project pricing
Contact: info@yndled.com | www.yndled.com/contact
